Reference Guide

452 | Configuration Rollback
www.dell.com | support.dell.com
Example
Related
Commands
debug rollback
c e
Enable debugging for the configuration replace and rollback feature.
Syntax
debug rollback
Disable debugging using the command undebug all.
Defaults
Debugging is disabled for all features by default.
Command Modes
EXEC Privilege
Command
History
Related
Commands
maximum number
c e
Set the maximum number of archives.
Syntax
maximum {number}
To return to the default, use the no maximum {number} command.
Parameters
Defaults
No default values or behavior
Command Modes
CONFIGURATION (conf-archive)
Command
History
Related
Commands
Note: When your session times out and you return to EXEC mode, the lock is no longer set.
FTOS(conf)#configuration mode exclusive auto
FTOS(conf)#exit
3d23h35m: %RPM0-P:CP %SYS-5-CONFIG_I: Configured from console by console
FTOS#config! Locks configuration mode exclusively.
FTOS(conf)#
configure terminal When configuration is set to manual, use this command to set the exclusive
mode.
Version 7.6.1.0 Introduced on C-Series and E-Series
undebug all Disable all debug operations on the system.
number
Enter the maximum number of files to archive.
Range: 2 to 15
Default: 10
Version 7.6.1.0 Introduced on C-Series and E-Series
show archive Display the archive