Reference Guide

414 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
show ip bgp ipv4 multicast neighbors
c e
t
s
Displays information on IPv4 multicast routes exchanged by BGP neighbors.
Syntax
show ip bgp ipv4 multicast neighbors [ipv4-neighbor-addr | ipv6-neighbor-addr]
[advertised-routes | dampened-routes | detail | flap-statistics | routes | received-routes
[network [network-mask]] | denied-routes [network [network-mask]]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Version 7.6.1.0 Introduced IPv6 MGBP support for E-Series
Version 7.8.1.0 Introduced support on S-Series
ipv4 multicast
Enter the
ipv4 multicast keywords to view information only related to IPv4
multicast routes.
ipv4-neighbor-addr |
ipv6-neighbor-addr
(OPTIONAL) Enter the IP address of the neighbor to view only BGP route
information exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view only the
routes the neighbor sent.
dampened-routes (OPTIONAL) Enter the keyword dampened-routes to view information on
dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific internal
information for the IPv4 Unicast address family.
flap-statistics (OPTIONAL) Enter the keyword flap-statistics to view flap statistics on the
neighbor’s routes.
routes (OPTIONAL) Enter the keywords routes to view only the neighbor’s feasible
routes.
received-routes
[network
[
network-mask]
(OPTIONAL) Enter the keywords received-routes followed by either the
network address (in dotted decimal format) or the network mask (in slash prefix
format) to view all information received from neighbors.
Note: neighbor soft-reconfiguration inbound must be configured prior to
viewing all the information received from the neighbors.
denied-routes
[network
[
network-mask]
(OPTIONAL) Enter the keywords denied-routes followed by either the
network address (in dotted decimal format) or the network mask (in slash prefix
format) to view all information on routes denied via neighbor inbound filters.
Version 8.4.1.0 Added support for the display of configured IPv4 multicast address families
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.5.1.0
Added
detail option and output now displays default MED value
Version 7.2.1.0 Added received and denied route options
Version 6.3.10 The output is changed to display the total number of advertised prefixes