Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 397
Command Modes
EXEC Privilege
Command
History
clear ip bgp ipv4 multicast soft
c e
t
s
Clear and reapply policies for IPv4 multicast routes without resetting the TCP connection; that is,
perform BGP soft reconfiguration.
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-neighbor-addr | peer-group name }
ipv4 multicast soft [in | out]
Parameters
Command Modes
EXEC Privilege
filter-list list
(OPTIONAL) Enter the keyword
filter-list followed by the name of a
configured AS-PATH list (max 16 characters).
regexp regexp (OPTIONAL) Enter the keyword regexp followed by regular expressions. Use
one or a combination of the following:
. = (period) any single character (including a white space)
* = (asterisk) the sequences in a pattern (0 or more sequences)
+ = (plus) the sequences in a pattern (1 or more sequences)
? = (question mark) sequences in a pattern (either 0 or 1 sequences). You must
enter an escape sequence (CTRL+v) prior to entering the ? regular
expression.
[ ] = (brackets) a range of single-character patterns.
( ) = (parenthesis) groups a series of pattern elements to a single element
{ } = (braces) minimum and the maximum match count
^ = (caret) the beginning of the input string. If the caret is used at the beginning
of a sequence or range, it matches on everything BUT the characters specified.
$ = (dollar sign) the end of the output string.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.6.1.0 Introduced IPv6 MGBP support for E-Series
*
Clear and reapply policies for all BGP sessions.
as-number Clear and reapply policies for all neighbors belonging to the AS.
Range: 0-65535 (2-Byte)
or
1-4294967295 (4-Byte)
or
0.1-65535.65535 (Dotted format)
ipv4-neighbor-addr |
ipv6-neighbor-addr
Clear and reapply policies for a neighbor.
peer-group name
Clear and reapply policies for all BGP routers in the specified peer group.
ipv4 multicast
Clear and reapply policies for all IPv4 multicast routes.
in Reapply only inbound policies. Note: If you enter soft, without an in or
out option, both inbound and outbound policies are reset.
out Reapply only outbound policies. Note: If you enter soft, without an in or
out option, both inbound and outbound policies are reset.