Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 387
Command Modes
EXEC
EXEC Privilege
Example
Figure 12-24. Command Example: show ip bgp peer-group (Partial)
detail (OPTIONAL) Enter the keyword detail to view detailed status information of
the peers in that peer group.
summary (OPTIONAL) Enter the keyword summary to view status information of the
peers in that peer group.
The output is the same as that found in show ip bgp summary command
Table 12-14. Command Example fields: show ip bgp peer-group
Line beginning with Description
Peer-group Displays the peer group’s name.
Administratively shut Displays the peer group’s status if the peer group is not enabled.
If the peer group is enabled, this line is not displayed.
BGP version Displays the BGP version supported.
Minimum time Displays the time interval between BGP advertisements.
For address family Displays IPv4 Unicast as the address family.
BGP neighbor Displays the name of the BGP neighbor.
Number of peers Displays the number of peers currently configured for this peer group.
Peer-group members: Lists the IP addresses of the peers in the peer group.
If the address is outbound optimized, a * is displayed next to the IP address.
#show ip bgp peer-group
Peer-group RT-PEERS
Description: ***peering-with-RT***
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP neighbor is RT-PEERS
Number of peers in this group 20
Peer-group members (* - outbound optimized):
12.1.1.2*
12.1.1.3*
12.1.1.4*
12.1.1.5*
12.1.1.6*
12.2.1.2*
12.2.1.3*
12.2.1.4*
12.2.1.5*
12.2.1.6*
12.3.1.2*
12.3.1.3*
12.3.1.4*
12.3.1.5*
12.3.1.6*
12.4.1.2*
12.4.1.3*
12.4.1.4*
12.4.1.5*
12.4.1.6*