Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 373
Example
Figure 12-11. Command Example: show ip bgp dampened-paths
Table 12-5 defines the information displayed in Figure 12-11.
Command
History
show ip bgp detail
c e s
Display BGP internal information for IPv4 Unicast address family.
Syntax
show ip bgp [ipv4 unicast] detail
Defaults
none
Command Modes
EXEC
EXEC Privilege
>show ip bgp damp
BGP table version is 210708, local router ID is 63.114.8.2
Status codes: s suppressed, d damped, h history, * valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Reuse Path
>
Table 12-5. show ip bgp dampened-paths Command Example
Field Description
Network Displays the network ID to which the route is dampened.
From Displays the IP address of the neighbor advertising the dampened route.
Reuse Displays the hour:minutes:seconds until the dampened route is available.
Path Lists all the ASs the dampened route passed through to reach the
destination network.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series