Reference Guide

File Management | 35
Usage
Information
In this streamline copy command, the source image is copied to the primary RPM and then, if
specified, to the standby RPM. After the copy is complete, the new image file path on each RPM is
automatically configured as the primary image path for the next boot. The current system image (the
one from which the RPM booted) is automatically configured as the secondary image path.
FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP.
copy running-config startup-config
c e
Copy running configuration to the startup configuration.
Syntax
copy running-config startup-config {duplicate}
Command Modes
EXEC Privilege
Command
History
Usage
Information
This command is useful for quickly making a changed configuration on one chassis available on
external flash in order to move it to another chassis.
When you use the copy running-config startup-config duplicate command to copy the running
configuration to the startup configuration, FTOS creates a backup file on the internal flash of the
startup configuration.
delete
c e s
Delete a file from the flash. Once deleted, files cannot be restored.
Syntax
delete flash-url [no-confirm]
Parameters
Command Modes
EXEC Privilege
Command
History
Note: The keywords boot-image, synchronize-rpm, and external can be used on the
Primary RPM only.
Version 7.5.1.0 Introduced on C-Series
Version 6.3.1.0 Introduced
flash-url
Enter the following location and keywords:
• For a file or directory on the internal Flash, enter
flash:// followed by the filename or
directory name.
• For a file or directory on the external Flash, enter
slot0:// followed by the filename or
directory name.
no-confirm (OPTIONAL) Enter the keyword no-confirm to specify that FTOS does not require user
input for each file prior to deletion.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command