Reference Guide

336 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Parameters
Command Modes
EXEC Privilege
Usage
Information
To view information on both incoming and outgoing routes, do not include the in and out parameters
in the debugging command. The in and out parameters cancel each other; for example, if you enter
debug ip bgp in and then enter debug ip bgp out, you will not see information on the incoming
routes.
Entering a no debug ip bgp command removes all configured debug commands for BGP.
Related
Commands
Command
History
debug ip bgp dampening
c e s
Display information on routes being dampened.
Syntax
debug ip bgp dampening [in | out]
To disable debugging, enter no debug ip bgp dampening.
Parameters
Command Modes
EXEC Privilege
Usage
Information
Enter no debug ip bgp command to remove all configured debug commands for BGP.
Related
Commands
ip-address
Enter the IP address of the neighbor in dotted decimal format.
peer-group
peer-group-name
Enter the keyword peer-group followed by the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only information on inbound BGP
routes.
out (OPTIONAL) Enter the keyword out to view only information on outbound
BGP routes.
debug ip bgp events View information about BGP events.
debug ip bgp keepalives View information about BGP keepalives.
debug ip bgp notifications View information about BGP notifications.
debug ip bgp updates View information about BGP updates.
show debugging View enabled debugging operations.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
in (OPTIONAL) Enter the keyword in to view only inbound dampened routes.
out (OPTIONAL) Enter the keyword out to view only outbound dampened routes.
show debugging View enabled debugging operations.
show ip bgp dampened-paths View BGP dampened routes.