Reference Guide

334 | Border Gateway Protocol IPv4 (BGPv4)
www.dell.com | support.dell.com
Command Modes
EXEC Privilege
Command
History
clear ip bgp peer-group
c e s
Reset a peer-group’s BGP sessions.
Syntax
clear ip bgp peer-group peer-group-name
Parameters
Command Modes
EXEC Privilege
Command
History
clear ip bgp dampening
c e s
Clear information on route dampening and return suppressed route to active state.
Syntax
clear ip bgp dampening [ip-address mask]
Parameters
Command Modes
EXEC Privilege
Usage
Information
After you enter this command, the software deletes history routes and returns suppressed routes to
active state.
Command
History
in Reapply only inbound policies. Note: If you enter soft, without an in or
out option, both inbound and outbound policies are reset.
out Reapply only outbound policies. Note: If you enter soft, without an in or
out option, both inbound and outbound policies are reset.
Version 8.4.1.0 Added BGP Soft Reconfiguration support for IPv4 unicast and IPv6 routes
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.2.1.0 Introduced
peer-group-name
Enter the peer group name to reset the BGP sessions within that peer group.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
ip-address mask
(OPTIONAL) Enter an IP address in dotted decimal format and the prefix mask
in slash format (/x) to clear dampening information only that BGP neighbor.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series