Reference Guide

Border Gateway Protocol IPv4 (BGPv4) | 333
Related
Commands
Command
History
capture bgp-pdu max-buffer-size
c e s
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
Defaults
40960000 bytes.
Command Modes
EXEC Privilege
Related
Commands
Command
History
clear ip bgp ipv4 unicast soft
c e s
Clear and reapply policies for IPv4 routes without resetting the TCP connection; that is, perform BGP
soft reconfiguration.
Syntax
clear ip bgp {* | as-number | ipv4-neighbor-addr | ipv6-neighbor-addr | peer-group name}
[ipv4 unicast] soft [in | out]
Parameters
capture bgp-pdu max-buffer-size Specify a size for the capture buffer.
show capture bgp-pdu neighbor Display BGP packet capture information
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.5.1.0 Introduced
100-102400000
Enter a size for the capture buffer.
capture bgp-pdu neighbor Enable capture of an IPv4 BGP neighbor packet.
capture bgp-pdu neighbor (ipv6) Enable capture of an IPv6 BGP neighbor packet.
show capture bgp-pdu neighbor Display BGP packet capture information for an IPv6 address on the
E-Series.
Version 7.8.1.0 Introduced support on S-Series
Version 7.7.1.0 Introduced support on C-Series
Version 7.5.1.0 Introduced
*
Clear and reapply policies for all BGP sessions.
as-number Clear and reapply policies for all neighbors belonging to the AS.
Range: 0-65535 (2-Byte)
or
1-4294967295 (4-Byte)
or
0.1-65535.65535 (Dotted format)
ipv4-neighbor-addr |
ipv6-neighbor-addr
Clear and reapply policies for a neighbor.
peer-group name
Clear and reapply policies for all BGP routers in the specified peer group.
ipv4 unicast
Clear and reapply policies for all IPv4 unicast routes.