Reference Guide

File Management | 31
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Usage
Information
To display these changes in the show bootvar command output, you must save the running
configuration to the startup configuration (using the copy command) and reload system.
Related
Commands
boot system gateway
c e
Specify the IP address of the default next-hop gateway for the management subnet.
Syntax
boot system gateway ip-address
Parameters
Command Modes
CONFIGURATION
Usage
Information
Saving the address to the startup configuration file preserves the address in NVRAM in case the startup
configuration file is deleted.
Command
History
Related
Commands
cd
c e s
Change to a different working directory.
Syntax
cd directory
secondary After entering rpm0 or rpm1, enter the keyword secondary to configure boot
parameters used if the primary operating system boot selection is not available.
file-url
To boot from a file:
• on the internal Flash, enter
flash:// followed by the filename.
• on an FTP server, enter
ftp://user:password@hostip/filepath
• on the external Flash, enter slot0:// followed by the filename.
• on a TFTP server, enter
tftp://hostip/filepath
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
change bootflash-image Change the primary, secondary, or default boot image configuration.
boot system gateway Specify the IP address of the default next-hop gateway for the management
subnet.
ip-address
Enter an IP address in dotted decimal format.
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
change bootflash-image Change the primary, secondary, or default boot image configuration.