Reference Guide

ACL VLAN Group | 299
EXEC Privilege
Command
History
Usage Notes
The output for this command is shown in a line-by-line format. This allows the ACL-VLAN-Group
names (or the Access List Group Names) to display in their entirety.
Example
Figure 10-4. Command Example: show acl-clan-group
show config
e
Display the current configuration of the ACL VLAN group.
Syntax
show config
Defaults
No default behavior or values
Command Modes
EXEC
Command
History
Example
Figure 10-5. show config Command Example
show running config acl-vlan-group
e
Display the running configuration of all or a given ACL VLAN Group.
Syntax
show running config acl-vlan-group group name
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
Version 7.8.1.0 Introduced on E-Series
FTOS(conf-acl-vl-grp)#show config
!
acl-vlan-group group1
description Acl Vlan Group1
member vlan 1-10,400-410,500
ip access-group acl1 out implicit-permit
FTOS#
Version 6.3.1.0 Introduced on E-Series
FTOS(conf-acl-vl-grp)#show config
!
acl-vlan-group group1
description Acl Vlan Group1
member vlan 1-10,400-410,500
ip access-group acl1 out implicit-permit
FTOS#
group name
Display only the ACL VLAN Group that is specified. The group name can
be up to 140 characters