Reference Guide

296 | ACL VLAN Group
www.dell.com | support.dell.com
Command
History
Usage
Information
You can have up to 8 different ACL VLAN groups at any given time.
Related
Commands
description
e
Add a description to the ACL VLAN group.
Syntax
description description
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION (conf-acl-vl-grp)
Command
History
Related
Commands
ip access-group
e
Apply an egress IP ACL to the ACL VLAN group.
Syntax
ip access-group {group name} out implicit-permit
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION (conf-acl-vl-grp)
Command
History
Usage
Information
Note: Only an egress IP ACL can be applied on an ACL VLAN group.
Related
Commands
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16
characters long.
Version 6.3.1.0 Introduced on E-Series
show acl-vlan-group Display the ACL VLAN groups
description
Enter a description to identify the ACL VLAN group (80 characters maximum).
Version 6.3.1.0 Introduced on E-Series
show acl-vlan-group Display the ACL VLAN groups
group name
Enter the name of the ACL VLAN group where you want the egress IP
ACLs applied, up to 140 characters.
Version 7.8.1.0 Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16
characters long.
Version 6.3.1.0 Introduced on E-Series
acl-vlan-group Create an ACL VLAN Group and name