Reference Guide
File Management | 29
Output for show bootvar with no boot configuration configured
Output for show bootvar with boot configuration configured
Related
Commands
boot host
c e
Set the location of the configuration file from a remote host.
Syntax
boot host {primary | secondary} remote-url
Parameters
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Usage
Information
To display these changes in the show bootvar command output, you must save the running
configuration to the startup configuration (using the copy command).
FTOS#show bootvar
PRIMARY IMAGE FILE = flash://FTOS-EF-8.2.1.0.bin
SECONDARY IMAGE FILE = flash://FTOS-EF-7.6.1.0.bin
DEFAULT IMAGE FILE = flash://FTOS-EF-7.5.1.0.bin
LOCAL CONFIG FILE = variable does not exist
PRIMARY HOST CONFIG FILE = variable does not exist
SECONDARY HOST CONFIG FILE = variable does not exist
PRIMARY NETWORK CONFIG FILE = variable does not exist
SECONDARY NETWORK CONFIG FILE = variable does not exist
CURRENT IMAGE FILE = flash://FTOS-EF-8.2.1.0.bin
CURRENT CONFIG FILE 1 = flash://startup-config
CURRENT CONFIG FILE 2 = variable does not exist
CONFIG LOAD PREFERENCE = local first
BOOT INTERFACE GATEWAY IP ADDRESS = variable does not exist
FTOS#show bootvar
PRIMARY IMAGE FILE = flash://FTOS-EF-8.2.1.0.bin
SECONDARY IMAGE FILE = flash://FTOS-EF-7.6.1.0.bin
DEFAULT IMAGE FILE = flash://FTOS-EF-7.5.1.0.bin
LOCAL CONFIG FILE = variable does not exist
PRIMARY HOST CONFIG FILE = variable does not exist
SECONDARY HOST CONFIG FILE = variable does not exist
PRIMARY NETWORK CONFIG FILE = variable does not exist
SECONDARY NETWORK CONFIG FILE = variable does not exist
CURRENT IMAGE FILE = flash://FTOS-EF-8.2.1.0.bin
CURRENT CONFIG FILE 1 = flash://CustomerA.cfg
CURRENT CONFIG FILE 2 = variable does not exist
CONFIG LOAD PREFERENCE = local first
BOOT INTERFACE GATEWAY IP ADDRESS = variable does not exist
show bootvar
Display the variable settings for the E-Series boot parameters.
primary Enter the keywords primary to attempt to load the primary host configuration files.
secondary Enter the keywords secondary to attempt to load the secondary host configuration files.
remote-url
Enter the following location keywords and information:
• For a file on an FTP server, enter
ftp://user:password@hostip/filepath
• For a file on a TFTP server, enter tftp://hostip/filepath
Version 7.5.1.0 Introduced on C-Series
E-Series original Command