Reference Guide

Access Control Lists (ACL) | 205

Access Control Lists (ACL)

Overview

Access Control Lists (ACLs) are supported on platforms c e s

FTOS supports the following types of Access Control List (ACL), IP prefix list, and route map:

• Commands Common to all ACL Types

• Common IP ACL Commands

• Standard IP ACL Commands

• Extended IP ACL Commands

• Common MAC Access List Commands

• Standard MAC ACL Commands

• Extended MAC ACL Commands

• IP Prefix List Commands

• Route Map Commands

• AS-Path Commands

• IP Community List Commands

Commands Common to all ACL Types

The following commands are available within each ACL mode and do not have mode-specific options.

Some commands may use similar names, but require different options to support the different ACL

types (for example, deny).

• description

• remark

• show config

Note: For ACL commands used in the Trace function, see the section Trace List Commands

in the chapter Security.

Note: For IPv6 ACL commands, see Chapter 25, IPv6 Access Control Lists (IPv6 ACLs).