Reference Guide

802.1ag | 171
Example
FTOS# show ethernet cfm domain
Domain Name: customer
Level: 7
Total Service: 1
Services
MA-Name VLAN CC-Int X-CHK Status
My_MA 200 10s enabled
Domain Name: My_Domain
Level: 6
Total Service: 1
Services
MA-Name VLAN CC-Int X-CHK Status
Your_MA 100 10s enabled
show ethernet cfm maintenance-points local
s
Display configured MEPs and MIPs.
Syntax
show ethernet cfm maintenance-points local [mep | mip]
Parameters
Defaults
None
Command Modes
EXEC Privilege
Command
History
Example
FTOS#show ethernet cfm maintenance-points local mip
-------------------------------------------------------------------------------
MPID Domain Name Level Type Port CCM-Status
MA Name VLAN Dir MAC
-------------------------------------------------------------------------------
0 service1 4 MIP Gi 0/5 Disabled
My_MA 3333 DOWN 00:01:e8:0b:c6:36
0 service1 4 MIP Gi 0/5 Disabled
Your_MA 3333 UP 00:01:e8:0b:c6:36
show ethernet cfm maintenance-points remote
s
Display the MEP Database.
Syntax
show ethernet cfm maintenance-points remote detail [active | domain {level | name} |
expired | waiting]
Parameters
mep
Enter this keyword to display configured MEPs.
mip
Enter this keyword to display configured MIPs.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on S-Series
active
Enter this keyword to display only the MEPs in active state.
domain [name | level]
Enter this keyword followed by the domain name or domain level.