Reference Guide

S-Series Debugging and Diagnostics | 1583
Defaults
No default behavior or values
Command Modes
EXEC Privilege
Command
History
Related
Commands
clear hardware system-flow
s
Clear system-flow statistics from selected hardware components.
Syntax
clear hardware system-flow layer2 stack-unit 0-7 port-set 0-1 counters
Parameters
Defaults
No default behavior or values
Command Modes
EXEC Privilege
Command
History
Related
Commands
hardware watchdog
s
Set the watchdog timer to trigger a reboot and restart the system.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear the data plane
statistics.
cpu party-bus statistics Enter the keywords cpu party-bus statistics to clear the management
statistics.
stack-port 0–52 Enter the keyword stack-port followed by the port number of the stacking
port to clear the statistics of the particular stacking port.
Range: 0 to 52
Note: You can identify stack port numbers by physical inspection of
the rear modules. The numbering is the same as for the 10G ports.
You can also inspect the output of the show system stack-ports
command.
Version 7.8.1.0 Introduced on S-Series
show hardware stack-unit Display the data plane or management plane input and output statistics of the
designated component of the designated stack member.
stack-unit 0-7 Enter the keyword stack-unit followed by 0 to 7 to select a particular
stack member and then enter one of the following command options
to clear a specific collection of data.
port-set 0–1 counters Enter the keyword port-set along with a port-pipe number, from 0 to 1,
followed by the keyword counters to clear the system-flow counters on
the selected port-pipe.
Note: S25 models (S25N, S25P, S25V, etc.) have only port-pipe 0.
Version 7.8.1.0 Introduced on S-Series
show hardware stack-unit Display the data plane or management plane input and output statistics of the
designated component of the designated stack member.