Reference Guide

E-Series Debugging and Diagnostics | 1571
show hardware rpm rp1/rp2
e
Display advanced debugging information for the RPM processors.
Syntax
show hardware rpm slot-number {rp1 | rp2} {data-plane | party-bus} {counters |
statistics}
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Usage
Information
If the “dropped cell” field is non-zero, look for a pattern such as burstiness when the counters
increment. It is normal to see a small number of continuous cell drops. Burstiness may indicate
congestion on the internal switch at a particular point in time.
Command
History
show interfaces link-status
e
Displays 10-Gigabit Ethernet link fault signaling and port status information.
Syntax
show interfaces tenGigabitEthernet slot/port link-status
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
slot-number
Enter the RPM slot number 0 or 1.
rp1 | rp2
Enter either the keyword rp1 or rp2 to designate which route processor
debug information to display.
data-plane (OPTIONAL) Enter the keywords data-plane to display control
processor information on the dataplane of the specified RPM.
party-bus (OPTIONAL) Enter the keywords party-bus to display control processor
information on the party-bus of the specified RPM.
counters (OPTIONAL) Enter the keyword counters to display the standard
Ethernet counters.
statistics (OPTIONAL) Enter the keyword statistics to display driver-related
counters
Version 6.5.4.0 Introduced
tenGigabitEthernet Enter the keyword tenGigabitEthernet followed by the slot/port
information.
Version 6.5.4.0 Introduced