Reference Guide

ManualsBrandsDell ManualsNetworkingForce10 S25-01-GE-24P

1561

E-Series Debugging and Diagnostics | 1565

show hardware fpc forward

Display receive and transmit counters, error counters and status registers for the forwarding functional

area of the FPC (flexible packet classification engine).

Syntax

show hardware linecard number port-set pipe-number fpc forward {counters | drops |

spi {err-counters | spichannel# counters} | status}

Parameters

Defaults

No default values or behavior

Command Modes

EXEC

EXEC Privilege

Command

History

Example

Figure 65-20. show hardware fpc forward drops Command Example

linecard number

Enter the keyword linecard followed by the line card slot number.

Range: 0 to 13 on E1200, 0 to 6 on E600/E600i, and 0 to 5 on E300

port-set pipe-number Enter the keyword port-set followed by the number of the line card’s

Port-Pipe.

Range: 0 to 1

counters (OPTIONAL) Enter the keyword counters to display the FPC receive and

transmit packet, byte counters, and error counters.

drops (OPTIONAL) Enter the keyword drops to display FPC drop-related error

counters.

spi err-counters (OPTIONAL) Enter the keywords spi err-counters to display the FPC

System Packet Interface (SPI) receive and transmit packet, byte counters, error

counters, and key status registers on the ingress and egress paths.

spi spichannel#

counters

(OPTIONAL) Enter the keywords spi spichannel# counters to display

the FPC System Packet Interface level 4 (SPI4) counters.

status (OPTIONAL) Enter the keywords status to display FPC status registers.

Version 6.5.4.0 Introduced

FTOS#show hardware linecard 4 port-set 0 fpc forward drops

SPI 0

ICMP Drops : 0x0

ACL Drops : 0x0

IBC_DROP : 0

EBC_DROP : 0

IFA_DROP_CNT : 0

EFA_DROP_CNT : 0

CMB_IC_DROP : 0

CMB_LG_DROP : 0

CMB_SF_DROP : 0

CMB_IPM_DROP : 0

CMB_OPM_DROP : 0

SPI 1