Reference Guide

E-Series Debugging and Diagnostics | 1561
Defaults
None
Command Mode
CONFIGURATION
Command
History
hardware monitor mac
e
Configure the system to shut down all ports on a line card upon a MAC hardware error.
Syntax
hardware monitor mac action-on-error port-shutdown
Defaults
None
Command Mode
CONFIGURATION
Command
History
hardware watchdog
e
Set the watchdog timer to trigger a reboot and restart the system.
Syntax
hardware watchdog
Defaults
Enabled
Command Mode
CONFIGURATION
Command
History
Usage
Information
This command enables a hardware watchdog mechanism that automatically reboots an FTOS switch/
router with a single unresponsive RPM. This is a last resort mechanism intended to prevent a manual
power cycle.
show cpu-interface-stats
e
The command provides an immediate snapshot of the health of the internal RPM and line card CPU.
Generally this command is used in concert with Dell Force10 Technical Support engineers.
Syntax
show cpu-interface-stats {cp | lp | rp1 | rp2}
Parameters
Version 7.7.1.0 Introduced
Version 7.7.1.0 Introduced
Version 7.7.1.0 Introduced
cp Enter the keyword cp to display the CP's interface statistics.
lp Enter the keyword lp to display the LP's interface statistics
rp1 Enter the keyword rp1 to display the RP1's interface statistics
rp2 Enter the keyword rp2 to display the RP2’s interface statistics.