Reference Guide

E-Series Debugging and Diagnostics | 1559
• show hardware fpc forward
• show hardware fpc lookup detail
• show hardware rpm cp
• show hardware rpm mac counters
• show hardware rpm rp1/rp2
• show interfaces link-status
• show logging driverlog
• show running-config hardware-monitor
See also in Chapter 23, Interfaces”:
• show interfaces phy
• show interfaces transceiver
clear hardware btm
e
Clear the Buffer Traffic Manager (BTM) error counters and status registers.
Syntax
clear hardware {rpm | linecard} number port-set pipe-number btm {egress | ingress | all}
{errors | status}
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
rpm Enter the keyword rpm to clear BTM error counters or status registers on
the RPM.
linecard number Enter the keyword linecard followed by the line card slot number to clear
BTM error counters or status registers on the specified line card.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on an E300
port-set pipe-number Enter the keyword port-set followed by the number of the line card or
RPM’s Port-Pipe.
Range: 0 to 1
egress errors | status
(OPTIONAL) Enter the keywords egress errors or egress status to
clear egress BTM error counters or ingress BTM status registers.
ingress errors | status
(OPTIONAL) Enter the keywords ingress errors or ingress status
to clear ingress BTM error counters or ingress BTM status registers.
all errors | status
(OPTIONAL) Enter the keywords all errors or all status to clear both
egress and ingress BTM error counters and status registers.
Version 6.5.4.0 Introduced