Reference Guide

1558 | E-Series Debugging and Diagnostics
www.dell.com | support.dell.com
show diag
e
Display current diagnostics information.
Syntax
show diag {information} [linecard number [detail | periodic | summary]]
Parameters
Defaults
summary
Command Mode
EXEC
EXEC Privilege
Command
History
H
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
The commands in this section are:
• clear hardware btm
• clear hardware rpm mac counters
• hardware monitor linecard
• hardware monitor mac
• hardware watchdog
• show cpu-interface-stats
• show hardware btm
information Enter the keyword information to view current diagnostics information in the
system.
linecard number (OPTIONAL) Enter the keyword linecard followed by the line card slot
number.
Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.
detail (OPTIONAL) Enter the keyword detail to view detailed diagnostics information.
periodic (OPTIONAL) Enter the keyword periodic to display diagnostics results
periodically.
summary (OPTIONAL) Enter the keyword summary to view a summary of the
diagnostics information.
Version 6.5.4.0 Introduced
Warning: These commands should be used only when you are working directly
with Dell Force10 TAC (Technical Assistance Center) while troubleshooting a
problem. Do not use these command without the assistance of a Dell Force10 TAC
representative. To contact Dell Force10 TAC for assistance:
E-mail Direct Support: [e-mail]
Web: www.force10networks.com/support/
Telephone support:
US and Canada customers: 866-965-5800
International customers: 408-965-5800