Reference Guide

154 | Control and Monitoring
www.dell.com | support.dell.com
Figure 5-62. Command Example: show tech-support (partial) on S-Series
Usage
Information
Without the page or stack-unit option, the command output is continuous, use Ctrl-z to interrupt
the command output.
The save option works with other filtering commands. This allows you to save specific information of
a show command. The save entry should always be the last option.
For example: FTOS#show tech-support |grep regular-expression |except regular-expression | find
regular-expression | save flash://result
This display output is an accumulation of the same information that is displayed when you execute one
of the following show commands:
• show cam
• show clock
• show environment
• show file
• show interfaces
• show inventory
FTOS#show tech-support stack-unit 0
----------------------------------- show version -------------------------------
Force10 Networks Real Time Operating System Software
Force10 Operating System Version: 1.0
Force10 Application Software Version: FTOS 7.6.1.0
Copyright (c) 1999-2007 by Force10 Networks, Inc.
Build Time: Tue Sep 12 15:39:17 IST 2006
Build Path: /sites/maa/work/sw/purushothaman/cser-latest/depot/main/Dev/Cyclone/
Force10 uptime is 18 minutes
System Type: S50N
Control Processor: MPC8451E with 255545344 bytes of memory.
32M bytes of Boot-Flash memory.
1 48-port E/FE/GE (SB)
48 GigabitEthernet/IEEE 802.3 interface(s)
4 Ten GigabitEthernet/IEEE 802.3 interface(s)
------------------------------------ show clock -------------------------------
12:03:01.695 UTC Wed Nov 21 2007
----------------------------------- show running-config ------------------------
Current Configuration ...
! Version E_MAIN4.7.5.414
! Last configuration change at Wed Nov 21 11:42:19 2007 by default
!
service timestamps log datetime
!
hostname FTOS
!
enable password 7 xxxxxxxx
!
username admin password 7 xxxxxxxx
!
enable restricted 7 xxxxxxxx
!
interface GigabitEthernet 0/1
no ip address
shutdown
!
interface GigabitEthernet 0/2
no ip address
shutdown
!
!------------- output truncated -----------------!