Reference Guide

E-Series Debugging and Diagnostics | 1535

E-Series Debugging and Diagnostics

Overview

FTOS supports an extensive suite of protocol-specific debug commands for packet- and event-level

debugging. These commands are described throughout this document. In addition, FTOS supports

commands for diagnosing suspected hardware issues.

This chapter contains the following sections:

• Diagnostics and Monitoring Commands

• Offline Diagnostic Commands

• Hardware Commands

Diagnostics and Monitoring Commands

The diagnostics and monitoring commands are:

• dataplane-diag disable loopback

• dataplane-diag disable sfm-bringdown

• dataplane-diag disable sfm-walk

• dataplane-diag disable dfo-reporting

• diag linecard

• diag sfm

• ip control-plane egress-filter-traffic

• ipv6 control-plane egress-filter-traffic

• logging coredump kernel disable

• logging coredump kernel server

• logging coredump linecard

• power-off/on sfm

• reset linecard

• reset sfm

• show command-history

• show console

• show diag sfm

• show processes ipc

• show processes ipc flow-control

• show revision