Reference Guide

C-Series Diagnostics and Debugging | 1527
show diag
c
View diagnostics information.
Syntax
show diag {information | linecard number | summary | detail}
Parameters
Defaults
None.
Command Mode
EXEC
EXEC Privilege
Command
History
H
Usage
Information
PoE Hardware Status Commands
Inspect C-Series line card internal commands with regard to Power over Ethernet (PoE).
show hardware linecard poe-status
c s
Display the status of the four C-Series PoE controllers and the entire registers associated with each
controller.
Syntax
show hardware linecard number poe-status
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
Command
History
information Enter the keyword information to view diagnostics processes
by line card.
linecard Enter the keyword linecard for diagnostics information for a
particular line card.
number
Enter a line card number.
Range: 0-7 for the C300
summary Enter the keyword summary brief diagnostics information.
detail Enter the keyword detail for detailed diagnostics information.
Version 7.5.1.0 Introduction
Warning: Do not use this command when a line card is in a booting state.
linecard number Enter the keyword linecard followed by the line card slot number.
Version 7.7.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series