Reference Guide

C-Series Diagnostics and Debugging | 1513
show hardware unit
c
View advanced debugging information on the internal Gigabit Ethernet interfaces on the CSF and FP
ASICs.
Syntax
show hardware {linecard number | rpm number} unit number {counters | details |
port-stats | register}
Parameters
Defaults
None
Command Mode
EXEC
EXEC Privilege
Command
History
Usage
Information
show revision
c
Displays the currently loaded FPGA images.
Syntax
show revision
Defaults
No default behavior or value
Command Modes
EXEC Privilege
Command
History
linecard Enter the keyword linecard to view information about a line
card.
rpm Enter the keyword rpm to view information about an RPM.
number
Enter a number after the following keywords:
• After the keyword
linecard:
Range: 0-7 for the C300
• After the keyword
rpm:
Range: 0-1
• After the keyword
unit, enter the number of CSF or FP ASIC.
Version 7.5.1.0 Introduction
Warning: Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.
Version 7.5.1.0 Introduced