Reference Guide

1510 | C-Series Diagnostics and Debugging
www.dell.com | support.dell.com
Advanced ASIC Debugging Commands
• clear hardware unit
• show cpu-interface-stats
• show hardware unit
• show revision
clear hardware unit
c
Clear debugging information on the internal Gigabit Ethernet interfaces on the CSF and FP ASICs.
Syntax
clear hardware {linecard number | rpm number} unit number counters
Parameters
Defaults
None.
Command Mode
EXEC
EXEC Privilege
Command
History
Usage
Information
show cpu-interface-stats
c
The command provides an immediate snapshot of the health of the internal RPM and line card CPU.
Generally this command is used in concert with Dell Force10 Technical Support engineers.
Syntax
show cpu-interface-stats {cp | lp | rp1 | rp2}
Parameters
linecard Enter the keyword linecard to clear information about a line
card.
rpm Enter the keyword rpm to clear information about an RPM.
number
Enter a number:
• After the keyword
linecard:
• Range: 0-7 for the C3000
• After the keyword
rpm:
Range: 0-1
• After the
unit keyword:
For a line card: Range: 0 - 3
For an RPM: Range 0 - 4
Version 7.5.1.0 Introduction
Warning: Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.
cp Enter the keyword cp to display the CP's interface statistics.
lp Enter the keyword lp to display the LP's interface statistics