Reference Guide

C-Series Diagnostics and Debugging | 1507
show hardware interface phy
c
View MAC- and PHY-related registers and link status information, including the transmitted and
received auto-negotiation control words.
Syntax
show hardware interface interface phy [registers]
Parameters
Defaults
None.
Command Mode
EXEC
EXEC Privilege
Command
History
phy Enter the keyword phy to display sent and received
auto-negotiation and Layer 1 link status information.
registers (OPTIONAL) Use the registers keyword to display a dump of
the PHY registers in hexadecimal.
interface
Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
Version 7.5.1.0 Introduction