Reference Guide

1502 | C-Series Diagnostics and Debugging
www.dell.com | support.dell.com
Example
Figure 64-4. show hardware rpm Command Example
Usage
Information
FTOS#show hardware rpm 0 cpu management statistics
Port #0 MIB Counters
GoodFramesReceived = 4214683
BadFramesReceived = 2
BroadcastFramesReceived = 275828
MulticastFramesReceived = 3787188
GoodOctetsReceived = 0x0000303000000000
GoodFramesSent = 9539
BroadcastFramesSent = 0
MulticastFramesSent = 0
GoodOctetsSent = 128
FC Control Counters
UnrecogMacControlReceived = 0
GoodFCFramesReceived = 0
BadFCFramesReceived = 0
FCFramesSent = 0
RX Errors
BadOctetsReceived = 260
UndersizeFramesReceived = 0
FragmentsReceived = 0
OversizeFramesReceived = 0
JabbersReceived = 0
MacReceiveErrors = 0
BadCrcReceived = 0
Rx Discarded packets counter= 0
Rx Overrun packets counter = 0
TX Errors
TxMacErrors = 0
TxExcessiveCollisions = 0
TxCollisions = 2
TxLateCollisions = 0
10 BASE-T half-duplex
Auto-negotiation is complete
The PHY Port power is normal
ethGiga #0 port Status: 0x2444 = 0x00000402
Link=UP, Speed=10, Duplex=HALF, RxFlowControl=DISABLE, padLen=136
RxCoal = 0 usec, TxCoal = 0 usec
MacAddr (0x3bc75e54) = 00:01:e8:2e:2f:20
RX Queue #0: base=0x42000000, free=1024
TX Queue #0: base=0x42008020, free=2048
MANAGEMENT PHY REGISTER VALUES
0x00: 0x1000 0x01: 0x796D 0x02: 0x0143 0x03: 0xBCB1
0x04: 0x0021 0x05: 0x41E1 0x06: 0x0065 0x07: 0x2001
0x08: 0x0000 0x09: 0x0000 0x0A: 0x0000 0x0B: 0x0000
0x0C: 0x0000 0x0D: 0x0000 0x0E: 0x0000 0x0F: 0x3000
0x10: 0x0000 0x11: 0x0100 0x12: 0x0000 0x13: 0x0000
0x14: 0x0000 0x15: 0x0101 0x16: 0x0000 0x17: 0x0F04
0x18: 0x0400 0x19: 0x8114 0x1A: 0x0000 0x1B: 0xFFFF
0x1C: 0x38A3 0x1D: 0x06CD 0x1E: 0x0000 0x1F: 0x0000
MII Control Register
SpeedSelection: 10Mbps
--More--
Warning: Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.