Reference Guide

1500 | C-Series Diagnostics and Debugging
www.dell.com | support.dell.com
Command
History
Example
Figure 64-2. show hardware rpm mac counters Command Example
Figure 64-3. show hardware rpm mac port-statistics Command Example
Usage
Information
Related
Commands
Version 7.5.1.0 Introduction
Table 64-1. show hardware rpm mac counters Output Description
Slot ID # Port number on the party-bus control switch.
RX Frames Number of packets received by the party-bus switch from the processor in the specified slot.
Note: Verify the counters are incrementing.
TX Frames Number of packets sent by the party-bus switch to the processor in the specified slot.
Note: Verify the counters are incrementing.
FTOS#show hardware rpm 0 mac counters
Received and Transmitted Packets without Errors
SLOT ID# Rx Counter TxCounter
RSM SLOTS:
0 1 17
1 0 0
LCM SLOTS:
0 0 0
1 17 1
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
FTOS#show hardware rpm 0 mac port-statistics linecard 1
IPC Switch Port Number :7
snmpIfInOctets : 2471340
snmpIfInUcastPkts : 2410
snmpIfOutOctets : 16046
snmpIfOutUcastPkts : 99
snmpDot1dTpPortInFrames : 2410
snmpDot1dTpPortOutFrames : 99
snmpEtherStatsPkts128to255Octets : 491
snmpEtherStatsPkts512to1023Octets : 640
snmpEtherStatsPkts1024to1518Octets : 1378
snmpEtherStatsOctets : 2487386
snmpEtherStatsPkts : 2509
snmpEtherStatsTXNoErrors : 99
snmpEtherStatsRXNoErrors : 2410
snmpIfHCInOctets : 2471340
snmpIfHCInUcastPkts : 2410
snmpIfHCOutOctets : 16046
snmpIfHCOutUcastPkts : 99
Warning: Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.
clear hardware rpm mac counters Clear the receive, transmit, and error counters and for the
party-bus port on the CPU of the specified RPM.