Reference Guide

1496 | C-Series Diagnostics and Debugging
www.dell.com | support.dell.com
Parameters
Defaults
None.
Command Mode
EXEC
EXEC Privilege
Command
History
Usage
Information
clear hardware rpm mac counters
Clear receive and transmit Ethernet statistics for all ports on the party-bus switch of the specified RPM.
Syntax
clear hardware rpm number mac counters
Parameters
Defaults
None.
Command Mode
EXEC
EXEC Privilege
Command
History
Usage
Information
linecard Enter the keyword linecard to clear counters on a line card.
rpm Enter the keyword rpm to clear counters on an RPM.
number
Enter a number after the following keywords:
• After the keyword
rpm:
Range: 0-1
• After the keyword
linecard:
Range: 0-7 for the C300
Version7.5.1.0 Introduction
Warning: Commands in this chapter with this Warning symbol should be used only
when you are working directly with Dell Force10 TAC (Technical Assistance Center)
while troubleshooting a problem. To contact Dell Force10 TAC for assistance:
E-mail Direct Support: [e-mail]
Web: www.force10networks.com/support/
Telephone support:
US and Canada customers: 866-965-5800
International customers: 408-965-5800
number
Enter the RPM slot number.
Range: 0-1
Version 7.5.10 Introduction
Warning: Use this command only when you are working directly with a technical
support representative to troubleshoot a problem. Do not use this command
unless a technical support representative instructs you to do so.