Reference Guide

C-Series Diagnostics and Debugging | 1495

C-Series Diagnostics and Debugging

Overview

This chapter contains the following sections:

• Inter-process Communication Commands

• RPM Management Port Commands

• Data Path Debugging Commands

• Interface Troubleshooting Commands

• Advanced ASIC Debugging Commands

• ACL and System-Flow Debug Commands

• Interface Management Debug Commands

• Layer 2 Debug Command

• Trace Logging Commands

• Offline Diagnostic Commands

• PoE Hardware Status Commands

• Buffer Tuning Commands

Inter-process Communication Commands

The following are Inter-Process Communication (IPC) commands. IPC commands display receive and

transmit frame counters for the party-bus switch and CPU interfaces. These interfaces are the interfaces

over which FTOS task-to-task control messages are exchanged.

• clear hardware cpu party-bus

• clear hardware rpm mac counters

• hardware monitor linecard

• hardware monitor mac

• hardware watchdog

• show hardware cpu party-bus

• show hardware rpm mac

clear hardware cpu party-bus

Clear the receive, transmit, and error counters for the party-bus port on the CPU of the specified line

card or RPM.

Syntax

clear hardware {linecard | rpm} number cpu party-bus statistics