Reference Guide

Control and Monitoring | 149
Related
Commands
show tech-support (C-Series and E-Series)
c e
Display, or save to a file, a collection of data from other show commands, the information necessary
for Dell Force10 technical support to perform troubleshooting.
Syntax
show tech-support [linecard 0-6 | page] | {display | except | find | grep | no-more | save}
Parameters
Command Modes
EXEC Privilege
Command
History
show version Display the FTOS version.
show processes memory
(S-Series)
Display memory usage based on running processes.
show system stack-ports Display information about the stack ports on all switches in the S-Series
stack.
show hardware stack-unit Display the data plane and management plane input and output statistics of a
particular stack member.
stack-unit priority Configure the ability of an S-Series switch to become the management unit
of a stack.
linecard 0-6 (OPTIONAL) Enter the keyword linecard followed by the linecard number to view
information relating to a specific linecard.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time.
Press the SPACE BAR to view the next 24 lines.
Press the ENTER key to view the next line of text.
display, except,
find, grep,
no-more
If you use the pipe command ( | ), then enter one of these keywords to filter command
output. Refer to Chapter 2, CLI Basics for details on filtering commands.
save Enter the save keyword (following the pipe) to save the command output.
flash: Save to local flash drive (flash://filename (max 20 chars) )
slot0: Save to local file system (slot0://filename (max 20 chars) )
Version 7.8.1.0
Introduced
save to file options
Version 7.5.1.0 Introduced on C-Series
Version 6.5.4.0 Show clock included in display on E-Series