Reference Guide

Virtual Router Redundancy Protocol (VRRP) | 1489
IPv6 VRRP Commands
The IPv6 VRRP commands are:
• clear counters vrrp ipv6
• debug vrrp ipv6
• show vrrp ipv6
• vrrp-ipv6-group
The following commands apply to IPv4 and IPv6:
• advertise-interval
• description
• disable
• hold-time
• preempt
• priority
• show config
• track
• virtual-address
clear counters vrrp ipv6
e c s
Clear the counters recorded for IPv6 VRRP groups.
Syntax
clear counters vrrp ipv6 [vrid | vrf instance]
Parameters
Command Modes
EXEC Privilege
Command
History
vrid
(OPTIONAL) Enter the number of an IPv6 VRRP group. Range: 1 to 255
vrf instance
(OPTIONAL) E-Series only: Enter the name of a VRF instance (32 characters maximum)
to clear the counters of all IPv6 VRRP groups in the specified VRF.
Version 8.4.1.0 Introduced on E-Series ExaScale, C-Series, and S-Series. Support was added for
IPv6 VRRP groups in non-default VRF instances
.
Version 8.3.2.0 Introduced on E-Series TeraScale