Reference Guide

144 | Control and Monitoring
www.dell.com | support.dell.com
show software ifm
c s
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface | stack-unit unit-ID |
trace-flags}
Parameters
Defaults
None
Command Mode
EXEC
EXEC Privilege
Command
History
clients
Enter the keyword clients to display IFM client information.
summary
(OPTIONAL) Enter the keyword summary to display brief information about IFM
clients.
ifagt number
Enter the keyword ifagt followed by the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface
Enter the keyword ifcb followed by one of the following interface IDs followed by the
slot/port information to display interface control block information for that interface:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet.
• For a Port Channel interface, enter the keyword
port-channel followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for
ExaScale.
• For a 10G Ethernet interface, enter the keyword
TenGigabitEthernet.
C-Series options also include:
• fastethernet for a Fast Ethernet interface
•
loopback for a Loopback interface
•
managementethernet for a Management Ethernet interface
•
null for a Null interface
•
vlan for a VLAN interface (Range: 1 to 4094, 1 to 2094 for ExaScale)
stack-unit
unit-ID
Enter the keyword stack-unit followed by the stack member number to display IFM
information for that unit.
Range: 0 to 1
Note: This option is only available on S-Series.
trace-flags
Enter the keyword trace-flags to display IFM information for internal trace flags.
Version 7.6.1.0 Introduced for C-Series and S-Series