Reference Guide

1416 | Storm Control
www.dell.com | support.dell.com
Parameters
Defaults
No default behavior or values
Command Modes
INTERFACE (conf-if-interface-slot/port)
Command
History
percentage
decimal_value in
E-Series Only: Enter the percentage of broadcast traffic allowed in to the
network. Optionally, you can designate a decimal value percentage, for example,
55.5%.
Percentage: 0 to 100
0 % blocks all related traffic
100% allows all traffic into the interface
Decimal Range: 0.1 to 0.9
wred-profile name E-Series Only: (Optionally) Enter the keyword wred-profile followed by the
profile name to designate a wred-profile.
packets_per_second
in
C-Series and S-Series Only: Enter the packets per second of broadcast traffic
allowed into the network.
Range: 0 to 33554431
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 E-Series Only: Added percentage decimal value option
Version 6.5.1.0 Introduced on E-Series