Reference Guide

S-Series Stacking Commands | 1403
Example
Figure 56-1. Using the reset stack-unit Command on the Stack Standby Unit
Related
Commands
show redundancy
s
Display the current redundancy configuration (status of automatic reboot configuration on stack
management unit).
Syntax
show redundancy
Command Modes
EXEC
EXEC Privilege
Command
History
FTOS#show system brief
Stack MAC : 00:01:e8:51:4e:f8
-- Stack Info --
Unit UnitType Status ReqTyp CurTyp Version Ports
---------------------------------------------------------------------------
0 Member online S50N S50N 4.7.7.117 52
1 Member online S50N S50N 4.7.7.117 52
2 Member online S50N S50N 4.7.7.117 52
3 Member online S50N S50N 4.7.7.117 52
4 Standby online S50N S50N 4.7.7.117 52
5 Member online S50N S50N 4.7.7.117 52
6 Mgmt online S50N S50N 4.7.7.117 52
7 Member online S50N S50N 4.7.7.117 52
FTOS(standby)#reset ? <<Standby management unit
stack-unit Unit number
FTOS(standby)#reset stack-unit ?
<0-7> Unit number id
FTOS(standby)#reset stack-unit 6
% Error: Reset of master unit is not allowed.
FTOS(standby)#reset stack-unit 0
% Error: Reset of stack units from standby is not allowed.
<<no reset of other member
FTOS(standby)#
FTOS(standby)#reset stack-unit 4 <<Resetting standby unit success!
00:02:50: %STKUNIT4-S:CP %CHMGR-5-STACKUNIT_RESET: Stack unit 4 being reset
00:02:50: %STKUNIT4-S:CP %CHMGR-2-STACKUNIT_DOWN: Stack unit 4 down - reset
00:02:50: %STKUNIT4-S:CP %IFMGR-1-DEL_PORT: Removed port: Gi 4/1-48
FTOS(standby)#rebooting
U-Boot 1.1.4 (Mar 6 2008 - 00:00:04)
<<Resetting master not allowed
reload Reboot FTOS.
upgrade (S-Series management unit) Reset the designated S-Series stack member.
Version 7.7.1.0 Introduced on S-Series