Reference Guide

1396 | SONET
www.dell.com | support.dell.com
Command
History
Example
Figure 55-2. show controllers sonet Command Example
Example
Figure 55-3. show controllers tengigabitethernet Command Example
Version 7.4.2.0 Added support for Ten Gigabit Ethernet
FTOS#show controllers sonet
Interface is SONET 1/2
SECTION
LOF = 0 LOS = 0 BIP(B1) = 0
LINE
AIS = 0 RDI = 0 FEBE = 0 BIP(B2) = 0
PATH
AIS = 0 RDI = 0 LOP = 0 FEBE = 0 BIP(B3) = 0
Active Defects: NONE
Active Alarms: NONE
Alarm reporting enabled for: SLOS SLOF B1-TCA LAIS LRDI B2-TCA PAIS PRDI PLOP B3-TCA SD SF
Framing is SDH, AIS-shut is enabled
Scramble-ATM is enabled, Down-when-looped is enabled
Loopback is disabled, Clock source is internal, Speed is Oc48
CRC is 32-bits, Flag C2 is 0x16, Flag J0 is 0xcc, Flag S1S0 is 0x2
FTOS#
Enabled Alarms are listed here (default is none)
FTOS#show controllers te 4/1
Interface is TenGigabitEthernet 4/1
SECTION
LOF = 0 LOS = 0 BIP(B1) = 13
LINE
AIS = 0 RDI = 1 FEBE = 7633 BIP(B2) = 19264
PATH
AIS = 0 RDI = 0 LOP = 0 FEBE = 8554 BIP(B3) = 15685
Active Defects: LRDI
Active Alarms: LRDI
Alarm reporting enabled for: SLOS SLOF B1-TCA LAIS LRDI B2-TCA PAIS PRDI PLOP B3-TCA SD SF
Framing is SONET, AIS-shut is enabled
Scramble-ATM is enabled, Down-when-looped is enabled
Loopback is disabled, Clock source is line, Speed is Oc192
CRC is 32-bits, Flag C2 is 0x1a, Flag J0 is 0xcc, Flag S1S0 is 0x0
FTOS#
Table 55-2. Lines in show controllers interface Command Example
Line Description
interface is... Displays the interface type and the slot and port number information.
SECTION
LOF
Displays the section loss of frame (LOF) error.
This error is detected when a severely error framing (SEF) defect on the incoming
interface signal persist for 3 milliseconds