Reference Guide

SNMP and Syslog | 1371
Usage
Information
If the interface is expected to flap during normal usage, you could disable this command.
Syslog Commands
The following commands allow you to configure logging functions on all Dell Force10 switches:
• clear logging
• default logging buffered
• default logging console
• default logging monitor
• default logging trap
• logging
• logging buffered
• logging console
• logging facility
• logging history
• logging history size
• logging monitor
• logging on
• logging source-interface
• logging synchronous
• logging trap
• show logging
• show logging driverlog stack-unit (S-Series)
• terminal monitor
clear logging
c e s
Clear the messages in the logging buffer.
Syntax
clear logging
Defaults
None.
Command Modes
EXEC Privilege
Command
History
Related
Commands
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
show logging Display logging settings and system messages in the internal buffer.