Reference Guide

SNMP and Syslog | 1357
show snmp engineID
c e s
Display the identification of the local SNMP engine and all remote engines that are configured on the
router.
Syntax
show snmp engineID
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 54-2. show snmp engineID Command
Related
Commands
show snmp group
c e s
Display the group name, security model, status, and storage type of each group.
Syntax
show snmp group
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The following example displays a group named ngroup. The ngroup has a security model of version 3
(v3) with authentication (auth), the read and notify name is nview with no write view name
specified, and finally the row status is active.
Example
Figure 54-3. show snmp group Command Example
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
FTOS#show snmp engineID
Local SNMP engineID: 0000178B02000001E80214A8
Remote Engine ID IP-addr Port
80001F88043132333435 172.31.1.3 5009
80001F88043938373635 172.31.1.3 5008
FTOS#
snmp-server engineID Configure local and remote SNMP engines on the router
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
E-Series legacy command
FTOS#show snmp group
groupname: ngroup security model: v3 auth
readview : nview writeview: no write view specified
notifyview: nview
row status: active
FTOS#