Reference Guide

Control and Monitoring | 135
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The output for show process memory displays the memory usage statistics running on CP part (sysd) of
the system. The Sysd is an aggregate task that handles all the tasks running on C-Series’ and E-Series'
CP.
In FTOS Release 7.4.1.0 and higher, the total counter size (for all 3 CPUs) in show memory and
show processes memory will differ based on which FTOS processes are counted.
• In the show memory (C-Series and E-Series) display output, the memory size is equal to the size
of the application processes.
• In the show processes memory (C-Series and E-Series) display output, the memory size is equal to
the size of the application processes plus the size of the system processes.
cp
(OPTIONAL) Enter the keyword cp to view memory usage of the Control Processor.
lp
slot-number
(OPTIONAL) Enter the keyword lp and the slot number to view information on the
line-card processor in that slot.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200/E1200i, 0 to 6 on a E600/E600i, and 0 to 5 on a
E300.
lp all (OPTIONAL) Enter the keyword lp all to view CP memory usage on all active line
cards.
lp summary
(OPTIONAL) Enter the keyword lp summary to view a summary of the line card
CP memory usage.
rp1
(OPTIONAL) Enter the keyword rp1 to view memory usage of the Route Processor 1.
Note: This option is supported on the E-Series only.
rp2
(OPTIONAL) Enter the keyword rp2 to view memory usage of the Route Processor 2.
Note: This option is supported on the E-Series only.
Version 8.1.1.2 Introduced on E-Series ExaScale E600i
Version 8.1.1.0 Introduced on E-Series ExaScale E1200i
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0
Added
lp all and lp summary options
Version 6.5.1.0
For
rp1 and rp2 only, the output displays memory consumption of all the processes
including a summary (see Figure 5-48 and Figure 5-49.