Reference Guide

128 | Control and Monitoring
www.dell.com | support.dell.com
Example 2
Figure 5-38. Command Example: show processes cpu management-unit on S-Series
FTOS#show processes cpu management-unit 0
CPU utilization for five seconds: 1%/0%; one minute: 10%; five minutes: 2%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY
Process
272 20 2 10000 0.00% 0.00% 0.00% 0
topoDPC
271 0 0 0 0.00% 0.00% 0.00% 0
bcmNHOP
270 0 0 0 0.00% 0.00% 0.00% 0
bcmDISC
269 0 0 0 0.00% 0.00% 0.00% 0
bcmATP-RX
268 0 0 0 0.00% 0.00% 0.00% 0
bcmATP-TX
267 30 3 10000 0.00% 0.00% 0.00% 0
bcmSTACK
266 380 38 10000 0.00% 0.00% 0.08% 0
bcmRX
265 30 3 10000 0.00% 0.00% 0.00% 0
bcmLINK.0
264 0 0 0 0.00% 0.00% 0.00% 0
bcmXGS3AsyncTX
263 0 0 0 0.00% 0.00% 0.00% 0
bcmTX
262 160 16 10000 0.00% 0.00% 0.00% 0
bcmCNTR.0
260 0 0 0 0.00% 0.00% 0.00% 0
bcmDPC
253 10690 1069 10000 0.00% 10.00% 2.97% 0
sysd
251 2380 238 10000 0.00% 0.00% 0.50% 0
kfldintr
58 30 3 10000 0.00% 0.00% 0.00% 0
sh
36 50 5 10000 0.00% 0.00% 0.00% 0 13 5 3 1
!-------- output truncated -------------!