Reference Guide

1278 | Security
www.dell.com | support.dell.com
• accounting
• show accounting
aaa accounting
c e s
Enable AAA Accounting and create a record for monitoring the accounting function.
Syntax
aaa accounting {system | exec | commands level} {name | default}{start-stop | wait-start
| stop-only} {tacacs+}
To disable AAA Accounting, use the no aaa accounting {system | exec | command level}
{name | default}{start-stop | wait-start | stop-only} {tacacs+} command.
Parameters
Defaults
No default configuration or behavior
Command Modes
CONFIGURATION
Command
History
Example
Figure 51-1. aaa accounting Command Examples
Usage
Information
In the example above, TACACS+ accounting is used to track all usage of EXEC command and
commands on privilege level 15.
Privilege level 15 is the default. If you want to track usage at privilege level 1, for example, use aaa
accounting command 1.
system Enter the keyword system to send accounting information of any other AAA
configuration.
exec Enter the keyword exec to send accounting information when a user has logged in
to the EXEC mode.
commands level Enter the keyword command followed by a privilege level for accounting of
commands executed at that privilege level.
name | default
Enter one of the following:
• For
name, a user-defined name of a list of accounting methods
•
default for the default accounting methods
start-stop Enter the keyword start-stop to send a “start accounting” notice at the beginning
of the requested event and a “stop accounting” notice at the end of the event.
wait-start Enter the keyword wait-start to ensure that the TACACS+ security server
acknowledges the start notice before granting the user’s process request.
stop-only Enter the keyword stop-only to instruct the TACACS+ security server to send a
“stop record accounting” notice at the end of the requested user process.
tacacs+ Enter the keyword tacacs+ to use TACACS+ data for accounting. FTOS currently
only supports TACACS+ accounting.
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
Version 6.3.1.0 Introduced for E-Series
FTOS(conf)# aaa accounting exec default start-stop tacacs+
FTOS(conf)# aaa accounting command 15 default start-stop tacacs+
FTOS (config)#