Reference Guide

Control and Monitoring | 127
show processes cpu (S-Series)
s
Display CPU usage information based on processes running in an S-Series.
Syntax
show processes cpu [management-unit 1-99 [details] | stack-unit 0-7 | summary | ipc |
memory [stack-unit 0-7]]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
Figure 5-37. Command Example: show processes cpu summary on S-Series
management-unit1-99
[details]
(OPTIONAL) Display processes running in the control processor. The
1-99 variable sets the number of tasks to display in order of the highest
CPU usage in the past five (5) seconds. Add the
details keyword to
display all running processes (except sysdlp). See Example 3.
stack-unit 0-7 (OPTIONAL) Enter the keyword stack-unit followed by the stack
member ID (Range 0 to 7).
As an option of
show processes cpu, this option displays CPU usage
for the designated stack member. See Example 2.
Or, as an option of
memory, this option limits the output of memory
statistics to the designated stack member. See Example 5.
summary (OPTIONAL) Enter the keyword summary to view a summary view of
CPU usage for all members of the stack. See Example 1.
ipc (OPTIONAL) Enter the keyword ipc to display inter-process
communication statistics.
memory (OPTIONAL) Enter the keyword memory to display memory statistics.
See Example 4.
Version 7.7.1.0 Modified: Added management-unit [details] keywords.
Version 7.6.1.0 Introduced for S-Series
FTOS#show processes cpu summary
CPU utilization 5Sec 1Min 5Min
-------------------------------------------
Unit0 0% 0% 0%
CPU utilization 5Sec 1Min 5Min
-------------------------------------------
Unit1* 1% 0% 0%
Unit2 0% 0% 0%
Unit3 0% 0% 0%
* Mgmt Unit