Reference Guide

Router Information Protocol (RIP) | 1247
Parameters
Defaults
Not configured.
Command Modes
ROUTER RIP
Command
History
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information originate command.
Related
Commands
redistribute isis
e
Redistribute routing information from an IS-IS instance.
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-value] [route-map
map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value] [route-map map-name] command.
Parameters
Defaults
Not configured.
Command Modes
ROUTER RIP
Command
History
connected Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
static Enter the keyword static to specify that information from static routes is redistributed.
Version 7.8.1.0 Introduced on S-Series
Version 7.6.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
default-information
originate
Generate a default route for RIP traffic.
tag
(OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keyword level-1 to redistribute only IS-IS Level-1
routes.
level-1-2 (OPTIONAL) Enter the keyword level-1-2 to redistribute both IS-IS Level-1
and Level-2 routes.
level-2 (OPTIONAL) Enter the keyword level-2 to redistribute only IS-IS Level-2
routes.
metric metric-value (OPTIONAL) Enter the keyword metric followed by a number as the metric
value.
Range: 0 to16
route-map map-name (OPTIONAL) Enter the keyword route-map followed by the name of a
configured route map.
pre-Version 6.2.1.1 Introduced on E-Series