Reference Guide

124 | Control and Monitoring
www.dell.com | support.dell.com
Table 5-3 defines the fields displayed in Figure 5-32.
show memory (S-Series)
s
View current memory usage on the S-Series switch.
Syntax
show memory [stack-unit 0-7]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The output for show memory displays the memory usage of LP part (sysdlp) of the system. The Sysdlp
is an aggregate task that handles all the tasks running on the S-Series’ CPU.
Example
Figure 5-33. Command Example: show memory on S-Series
show processes cpu (C-Series and E-Series)
c e
View CPU usage information based on processes running in the system.
Syntax
show processes cpu [cp | rp1 | rp2] [lp [linecard-number [1-99] | all | summary]
Parameters
Table 5-3. Descriptions for show memory output
Field Description
Lowest Displays the memory usage the system went to in the lifetime of the system. Indirectly, it
indicates the maximum usage in the lifetime of the system: Total minus Lowest.
Largest The current largest available. This relates to block size and is not related to the amount of
memory on the system.
stack-unit 0-7 (OPTIONAL) Enter the keyword stack-unit followed by the stack unit ID of the
S-Series stack member to display memory information on the designated stack
member.
Version 7.6.1.0 Introduced this version of the command for the S-Series
FTOS#show memory stack-unit 0
Statistics On Unit 0 Processor
===========================
Total(b) Used(b) Free(b) Lowest(b) Largest(b)
268435456 4010354 264425102 264375410 264425102
cp (OPTIONAL) Enter the keyword cp to view CPU usage of the Control
Processor.
rp1 (OPTIONAL) Enter the keyword rp1 to view CPU usage of the Route
Processor 1.
Note: This option is supported on the E-Series only.