Reference Guide

Quality of Service (QoS) | 1213
Example 2
Figure 47-11. show qos policy-map detail (IPv6) Command Output (E-Series only)
Example 3
Figure 47-12. show qos policy-map summary (IPv4) Command Output
show qos policy-map-input
c e s
View the input QoS policy map details.
Syntax
show qos policy-map-input [policy-map-name] [class class-map-name] [qos-policy-input
qos-policy-name]
Parameters
Defaults
No default behavior or values
Command Modes
EXEC
EXEC Privilege
Command
History
FTOS# show qos policy-map detail gigabitethernet 0/0
Interface GigabitEthernet 8/29
Policy-map-input pmap1
Trust ipv6-diffserv
Queue# Class-map-name Qos-policy-name
0 c0 q0
1 c1 q1
2 c2 q2
3 c3 q3
4 c4 q4
5 c5 -
6 c6 q6
7 c7 q7
FTOS#
FTOS# show qos policy-map summary
Interface policy-map-input policy-map-output
Gi 4/1 PM1 -
Gi 4/2 PM2 PMOut
FTOS#
policy-map-name
Enter the policy map name.
class class-map-name
Enter the keyword class followed by the class map name.
qos-policy-input
qos-policy-name
Enter the keyword qos-policy-input followed by the QoS policy name.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 E-Series Only: Added Trust IPv6 diffserv
Version 6.2.1.1 Introduced on E-Series