Reference Guide
1210 | Quality of Service (QoS)
www.dell.com | support.dell.com
Command
History
Example
Figure 47-5. show cam layer3-qos linecard interface Command Output
In these figures outputs, note that:
• The entry TRUST-DSCP in the Queue column indicates that the trust diffserv is configured on the
policy-map.
• A hyphen (-) entry in the DSCP Marking column indicates that there is no DSCP marking.
• In the Proto column (Protocol), IP, ICMP, UDP, and TCP strings are displayed. For other
protocols, the corresponding protocol number is displayed.
Example
Figure 47-6. show cam layer3-qos linecard port-set Command Output
Example
Figure 47-7. show cam layer3-qos linecard interface Command without Trust Output
Example
Figure 47-8. show cam layer3-qos summary Command Output
Version 6.5.1.0 Introduced on E-Series
FTOS#sh cam layer3-qos interface gigabitethernet 2/1
Cam Port Dscp Proto Tcp Src Dst SrcIp DstIp DSCP Queue
Index Flag Port Port Marking
--------------------------------------------------------------------------------------------
----
23488 1 0 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - TRUST-DSCP
FTOS#
FTOS#show cam layer3-qos linecard 13 port-set 0
Cam Port Dscp Proto Tcp Src Dst SrcIp DstIp DSCP Queue
Index Flag Port Port Marking
----------------------------------------------------------------------------------------
24511 1 0 TCP 0x5 2 5 1.0.0.1/24 2.0.0.2/24 - TRUST-DSCP
24512 1 0 UDP 0x2 2 5 8.0.0.8/24 8.0.0.8/24 23 3
FTOS#
FTOS#sh cam layer3-qos interface gigabitethernet 2/1
Cam Port Dscp Proto Tcp Src Dst SrcIp DstIp DSCP Queue
Index Flag Port Port Marking
-----------------------------------------------------------------------------------------
-------
23488 1 56 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 7
23489 1 48 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 6
23490 1 40 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 5
23491 1 0 IP 0x0 0 0 10.1.1.1/32 20.1.1.1/32 - 0
23492 1 0 IP 0x0 0 0 10.1.1.1/32 20.1.1.2/32 - 0
24511 1 0 0 0x0 0 0 0.0.0.0/0 0.0.0.0/0 - 0
FTOS#
FTOS#show cam layer3-qos linecard 13 port-set 0 summary
Total number of CAM entries for Port-Set 0 is 100
FTOS#