Reference Guide

1206 | Quality of Service (QoS)
www.dell.com | support.dell.com
Usage
Information
A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
Related
Commands
service-policy output
c e s
Apply an output policy map to the selected interface.
Syntax
service-policy output policy-map-name
To remove the output policy map from the interface, use the no service-policy output
policy-map-name command.
Parameters
Defaults
No default behavior or values
Command Modes
INTERFACE
Command
History
Usage
Information
A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
Related
Commands
service-queue
c e s
Assign a class map and QoS policy to different queues.
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name]
To remove the queue assignment, use the no service-queue queue-id [class-map
class-map-name] [qos-policy qos-policy-name] command.
Note: The service-policy commands are not allowed on a port channel.
The service-policy input policy-map-name command and the service-class dynamic
dot1p command are not allowed simultaneously on an interface. However, the service-policy
input command (without the policy-map-name option) and the service-class dynamic
dot1p command are allowed on an interface.
policy-map-input Create an input policy map.
policy-map-name
Enter the name for the policy map in character format (16 characters
maximum).
You can identify an existing policy map or name one that
does not yet
exist.
Version 7.6.1.0 Introduced on C-Series and S-Series
pre-Version 6.1.1.1 Introduced on E-Series
policy-map-output Create an output policy map.