Reference Guide

Quality of Service (QoS) | 1195
match mac access-group
c e s
Configure a match criterion for a class map, based on the contents of the designated MAC ACL.
Syntax
match mac access-group {mac-acl-name}
Parameters
Defaults
No default values or behavior
Command Modes
CLASS-MAP
Command
History
Usage
Information
You must enter the class-map command in order to access this command. Once the class map is
identified, you can configure the match criteria.
Related
Commands
match mac dot1p
c e s
Configure a match criterion for a class map, based on a dot1p value.
Syntax
match mac dot1p {dot1p-list}
Parameters
Defaults
No default values or behavior
Command Modes
CLASS-MAP
Command
History
Usage
Information
You must enter the class-map command in order to access this command. Once the class map is
identified, you can configure the match criteria.
Related
Commands
mac-acl-name
Enter a MAC ACL name. Its contents will be used as the match criteria in the class map.
Version 8.2.1.0 Available on the C-Series and S-Series.
Version 7.5.1.0 Added support for DSCP Marking option
Version 7.4.1.0 Introduced
class-map Identify the class map.
dot1p-list
Enter a dot1p value.
Range: 0–7
Version 8.2.1.0 Available on the C-Series and S-Series.
Version 7.5.1.0 Added support for DSCP Marking option
Version 7.4.1.0 Introduced
class-map Identify the class map.