Reference Guide

Per-VLAN Spanning Tree plus (PVST+) | 1175
vlan bridge-priority
c e s
Set the PVST+ bridge-priority for a VLAN or a set of VLANs.
Syntax
vlan vlan-range bridge-priority value
To return to the default value, enter no vlan bridge-priority command.
Parameters
Defaults
32768
Command Modes
CONFIGURATION (conf-pvst)
Command
History
Related
Commands
vlan vlan-range Enter the keyword vlan followed by the VLAN number(s).
Range: 1 to 4094
bridge-priority value Enter the keyword bridge-priority followed by the bridge priority value
in increments of 4096.
Range: 0 to 61440
Default: 32768
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.2.1.1 Introduced
vlan forward-delay Change the time interval before FTOS transitions to the forwarding state
vlan hello-time Change the time interval between BPDUs
vlan max-age Change the time interval before PVST+ refreshes
show spanning-tree pvst Display the PVST+ configuration